Sign In | Join Free | My fnxradio.com
China Pego Electronics (Yi Chun) Company Limited logo
Pego Electronics (Yi Chun) Company Limited
Pego Electronics-Focus on developing and promoting IEC lab testing equipments
Verified Supplier

7 Years

Home > Environment Test Equipment >

IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof

Pego Electronics (Yi Chun) Company Limited
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof

Brand Name : PEGO GROUP

Model Number : IPX34AS

Certification : Third-Lab Calibration Certificate

Place of Origin : China

MOQ : 1 set

Price : USD2000~USD3000

Payment Terms : T/T, Western Union, MoneyGram

Delivery Time : 15 working days

Packaging Details : carton

Standard : IEC60529, IEC60598

Material : SUS304 stainless steel

Warranty : 12 months

Shipment : by sea

Product name : waterproof Environmental Test Chambers

Configuration : spray nozzle+control box

Contact Now

IEC60529 IPX3 and IPX4 Brass Spray Nozzle Test Equipment (Built-in Water Tank)

Introduction

IEC60529 IPX3 and IPX4 brass spray nozzle test equipment is consisted by brass spray nozzle and control box (built-in water tank), IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. This equipment is to simulate the raining conditions to check the physical performance of outdoor luminaires, household appliance, auto parts and etc.

the counterbalanced shield is in place for IPX3 test, the water pressure is adjusted to give the specified delivery rate, the pressure to achieve this delivery rate will be in the range of 50kPa to 150kPa, and it should be kept constant during the test, the test duration is 1min/m2 of the calculated surface of the enclosure and with a minimum duration of 5 min. For IPX4 test, the counterbalanced shield is removed from the spray nozzle and the enclosure is sprayed from all practicable directions, the rate of water flow and the spraying time per unit area are same as IPX3 test.

Specification

Outer size (L*W*H)

870mm*600mm*950mm (control box)

370mm*115mm*165mm (spray nozzle)

Spray nozzle diameter 102mm
Number of holes 121
Hole diameter Φ0.5mm
Holes position

1 hole at center

1 inner circles of 12 holes at 300 pitch

4 outer circles of 24 holes at 150pitch

Outer diameter of water inlet Φ16mm
Outer diameter of water pipe Φ28mm
Flow rate 10L/min±5%
Flowmeter adjustment method Manual adjustment
Water pressure range 50-150Kpa
Flowmeter display Glass flow meter
Capacity of water tank 150L
Working power 220V/50Hz
Water source

1). The user is required to configure a water source for the equipment at the installation site, with a water pressure not less than 0.2Mpa, and install a 4/8 inch faucet.

2). The faucet is not more than 2 meters away from the equipment

Requirement for the site The ground is level, the drainage is unobstructed, the ground and walls are waterproofed, and the floor drain or drainage ditch is set

Picture

IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof


Product Tags:

IPX3 Environment Test Equipment

      

IEC60529 Environment Test Equipment

      

Waterproof Environment Test chamber

      
Wholesale IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof from china suppliers

IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Pego Electronics (Yi Chun) Company Limited
*Subject:
*Message:
Characters Remaining: (0/3000)